5g Thermal Conductive Heatsink Viscous Adhesive Glue Compound Glue CPU LED IC Heatsink Plaster Conductive Heatsink Plaster Thermal Silicone Adhesive Cooling Paste For Computer Heat Sink

• 
• 
• 
• 

price1/22.000 đ price/15.400 đ off/-30%

Tình Trạng: Còn Sản Phẩm

Sản Phẩm Từ: Shoppe - livebecool.vn

🏪 Đã Đăng:1,4k sản phẩm.
         Tỉ lệ phản hồi 75%

🌕 Trạng Thái: Online 6 Phút Trước
         Cập nhật sản phẩm.

🚩 Tham Gia Từ: ⇋ 4 tháng trước
         Đăng sản phẩm đầu tiên.

🚚 Vận Chuyển Từ:
         Nơi bán Sản Phẩm.

💲  Vận Chuyển Tới: Liên Tỉnh Việt Nam
         Phí vận chuyển ước tính: 17.000đ - 54.500đ.
           Nước Ngoài từ 7 đến 14 ngày vận chuyển.

SHOPPE Đảm Bảo 3 Ngày Trả Hàng và Hoàn Tiền

• Chi Tiết Sản Phẩm  
MÔ TẢ SẢN PHẨM
Package Included:
1 x Heatsink Plaster
Specifications:
Thermal properties, strong glue adhesion.
Specifications: 5g (single)
Melting amount: 0 (200°C/24 Hours)
Evaporation: 0.001% (200°C/24 Hours)
Thermal Conductivity: >0.671W/m-K
Impedance: <0.06
Ging Time: 3min (25°C)
Track Strength: 25Kg
Strength of Connected Buildings: 1.5map
Margin Coefficient: >5.1
Scatter Coefficient: <0.005
Description:
1.It has high strength and fast bonding effect, and is suitable for directly attaching various components, LEDs and heat sinks.
2.Good thermal conductivity, strong adhesion, vacuum packaging is not easy to oxidize and dry, good viscosity, short drying time.
3.It has good conductivity, wide operating temperature range (-60~200°C), and short-term resistance to 300°C.
4.It has short surface curing time, long storage period, non-toxic, solvent-free, and can be safely applied to elastic bonding, heat dissipation, insulation and packaging of electronics, instruments, LEDs, heat sinks, etc.
5.Instructions:
1) Extrusion of the product directly during use, rubbing the surface of the adherend, and immediately covering it after use, in case of trial again
2) The surface fixed speed is related to the relative humidity and temperature in the air; the higher the temperature, the faster the curing speed, and vice versa.
3) Recommended thickness: 0.1-0.5mm, the thinner the better.
4) Please use solvent to clean the surface of the bonded object before use (such as alcohol), avoid cleaning with detergent, and apply it after the surface is clean.
6.The package is sealing and the product is covered with a vacuum bag to insulate the air and increase the storage time.
---

Cám ơn bạn đã phản hồi.